Finally, an easy way to read your water temperature from indoors. The WS-314 wireless pool and spa thermometer is water proof and floats on the surface of the water. The sensor wirelessly transmits the water temperature to the display console. The console also includes an indoor thermometer for monitoring air temperature. The 8-channel selectable switch allows you to monitor temperatures from up to eight different locations. The screw-on lid design with internal gasket provides a leak free, water resistant design. The WS-314 includes one remote, and seven additional sensors can be added (F007T air temperature, F007TP temperature probe and F007PT floating pool and spa thermometer) for comprehensive monitoring. Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC). The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries. Optional calibration is provided for the utmost accuracy, Although calibration is optional and not required, the purpose of calibration is to fine tune or correct for any sensor error associated with the devices margin of error and inevitable sensor drift associated with electronic measurements. The measurement can be adjusted from the console to calibrate to a known source. Ideal for Pool and Spa applications but useful for other temperature applications, the WS-314 includes a display with programmable audible and visual alerts when temperature limits are exceeded.. The display console displays temperature, minimum and maximum temperature, which can be reset manually or daily, date and time. The scroll mode allows you to view the indoor thermometer and remote channels without pressing any buttons. Important Note: The F008PFN is designed to float. If the F008PFN is used under a cover and the sensor is constantly submerged, the additional pressure will lead to premature gasket failure.

Monitor the indoor temperature and humidity and outdoor temperature from two different locations! Wireless indoor and outdoor temperature, made simple. Looking for a device that does not require complicated programming? Simply insert batteries in the base and remote units, and install the thermometer outside or anywhere where temperature is critical. The outdoor temperature is transmitted to the display console inside. The display is simple and easy to read. The remote includes mounting hole for hanging outside or on a wall. Includes minimum and maximum temperature and humidity display with 24 hour reset option. The units of measure can be switched between DegreeC and DegreeF. Only requires 2 x AA batteries, which reduces operational costs. Includes signal strength indicator on the display.

The sensor wirelessly transmits the water temperature to the display console.

The screw-on lid with locking key design with double internal gaskets provide a leak free, water resistant design.

Perfect for ponds, tanks, and any other fluid based water applications.

Important Note: The F008PFN is designed to float. If the F008PFN is used under a cover and the sensor is constantly submerged, the additional pressure will lead to premature gasket failure. Moisture will enter the sensor compartment and cause sensor failure.

If you use a pool or spa cover, we suggest ordering the F007TP probed sensor instead. The Display Console:
Indoor temperature range: 32°F to +140°F
Temperature accuracy: +/-2.0°F
Console Dimensions (LxWxH): 3.5 x 2.5 x 0.6″
Low power consumption
Power requirements:
Base station: 2 x “AAA” alkaline batteries (batteries not included)
Transmission frequency: 433MHz
Transmission range: up to 120 feet
The Floating Pool and Spa Thermometer:
Line of sight wireless transmission (in open air): 300 feet under ideal conditions, 100 feet under most conditions.
Frequency: 433 MHz
Update Rate: 60 seconds
Power Consumption:
Remote sensor : 4 x AAA 1.5V Alkaline or Lithium batteries (not included)
Dimensions:
Pool Float Thermometer transmitter (WS-PFT120) Dimensions (LxWxH): 8.5″ x 4.2″ x 3.7″

The Console:
Indoor temperature
Scroll mode automatically displays each sensor every 5 seconds (channels 3-8)
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature
Monitors temperature in up to 8 remote locations
Console Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in
LCD Dimensions (LxW): 3.75 x 3.50″
LCD Segment Height: 1.25 inches
Power requirements: Main Unit – 4 x AAA (not included)
The Wireless Thermometer:
Outdoor temperature range: lithium batteries: -40°F to 140°F
Outdoor temperature range: non-lithium batteries: -4°F to 140°F
Dip switch selectable remote channels
Transmission range of up to 300 feet line of sight (100 feet under most conditions)
Frequency: 433 MHz
Update Rate: 60 seconds
Power requirements: Remote Sensor – 2 x AAA (not included)

Additional Features:
The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.

Optional calibration is provided for the utmost accuracy.

The display console displays temperature, minimum and maximum temperature, which can be reset manually or daily, date and time.

The scroll mode allows you to view the indoor thermometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

Specifications:
The Probe Thermometer:
3 foot plastic-tipped probe
Outdoor temperature range: non-lithium batteries: -4°F to 140°F (-20°C to 60°C)
Outdoor temperature range: lithium batteries: -40°F to 140°F (-40°C to 60°C)
Includes eight channel dip switches
LCD degF / degC selectable display
Battery Power: 2 x AAA (not included)
Dimensions: 4.5 x 2 x 0.75 inches
60 second update rate
The Console:
Scroll mode automatically displays each sensor every 5 seconds (channels 1-8)
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature
Monitors temperature in up to 8 remote locations
Console Dimensions (LxHxW): 4.0 x 3.0 x 0.75 in
Power requirements: 3 x AAA (not included)

Finally, an easy way to read your water temperature from both indoors and outdoors. The WS-25 wireless pool and spa thermometer is water proof and floats on the surface of the water. The sensor displays and wirelessly transmits the water temperature to the display console.

The console includes audible and visual alarms when temperatures exceed your pre-set minimum and maximum alarm settings.

The WS-09 includes two remote thermometers and six additional sensors can be added (F007TP, F007T, F007PF) for comprehensive monitoring.

The display console displays temperature, minimum and maximum temperature, which can be reset manually.

The scroll mode allows you to view the indoor thermometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC).

The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.

Features:
Includes two wireless temperature sensors with water proof probes
Remote temperature range: lithium batteries: -40°F to 140°F
Remote temperature range: non-lithium batteries: -4°F to 140°F
Scroll mode automatically displays each sensor every 5 seconds
Dip switch selectable remote channels
Re-sync mode if sensor reception is interrupted
Min/Max Memory for temperature resets manually
Monitors temperature in up to 8 remote locations
Includes two remote sensors (F007TP) – transmission range of up to 300 feet line of sight (100 feet under most conditions)
Frequency: 433 MHz
Update Rate: 60 seconds
Console Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in
LCD Dimensions (LxW): 3.75 x 3.50″
Power requirements:
Main Unit – 4 x AAA (not included)
Remote Sensor – 2 x AAA (not included)

Additional Features:
The WS-14-X2 includes two remotes, and six additional sensors can be added (F007T air temperature, F007TP temperature probe and F007PF pool float thermometer).

Each remote sensor includes dip switches for channel selection and units of measure.

The sensor search mode allows you to re-sync sensors without removing and re-inserting batteries.

Optional calibration is provided for the utmost accuracy.

The WS-14 includes audible and visual alerts when temperature limits are exceeded.

The display console displays temperature, minimum and maximum temperature, which can be reset manually or daily.

The scroll mode allows you to view the indoor thermometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

The Floating Pool and Spa Thermometer:
LCD display
Eight channel selectable switch
Line of sight wireless transmission (in open air): 300 feet under ideal conditions, 100 feet under most conditions.
Frequency: 433 MHz
Update Rate: 60 seconds.
Power Consumption: 4 x AAA 1.5V Alkaline or Lithium batteries (not included)
Solar powered with battery back up
Dimensions: Pool Float Thermometer transmitter Dimensions (LxWxH): 8.5″ x 4.2″ x 3.7″
The Console:
Scroll mode automatically displays each sensor every 5 seconds (channels 1-8)
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature
Monitors temperature in up to 8 remote locations
Console Dimensions (LxHxW): 4.0 x 3.0 x 0.75 in
Battery Power: 3 x AAA (not included)

Important Note: Not recommended for covered spas. We recommend the F007TP instead.

The console includes audible and visual alarms when temperatures exceed your pre-set minimum and maximum alarm settings

The display console displays temperature, minimum and maximum temperature, which can be reset manually or daily, date and time.

The scroll mode allows you to view the indoor thermometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

The Console:
Indoor temperature
Scroll mode automatically displays each sensor every 5 seconds
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature
Monitors temperature in up to 8 remote locations
Console Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in
LCD Dimensions (LxW): 3.75 x 3.50″
LCD Segment Height: 1.25 inches
Power requirements: Main Unit – 4 x AAA (not included)
The Wireless Thermometer:
Outdoor temperature range: lithium batteries: -40°F to 140°F
Outdoor temperature range: non-lithium batteries: -4°F to 140°F
Dip switch selectable remote channels
Ttransmission range of up to 300 feet line of sight (100 feet under most conditions)
Frequency: 433 MHz
Update Rate: 60 seconds
Power requirements: Remote Sensor – 2 x AAA (not included)

Additional Features:
The WS-14 includes one remote, and seven additional sensors can be added (F007T, F007TP and F007PF).

Each remote sensor includes dip switches for channel selection and units of measure (degF vs degC).

Ideal for Pool and Spa applications but useful for other temperature applications, the WS-14 includes a display with programmable audible and visual alerts when temperature limits are exceeded..

The display console displays temperature, minimum and maximum temperature, which can be reset manually or daily.

The scroll mode allows you to view the indoor thermometer and remote channels without pressing any buttons. In scroll mode, all of the indoor and detected outdoor sensors will be displayed in five second intervals.

Features:
The Floating Pool and Spa Thermometer:
LCD display
Eight channel selectable switch
Line of sight wireless transmission (in open air): 300 feet under ideal conditions, 100 feet under most conditions.
Frequency: 433 MHz
Update Rate: 60 seconds.
Power Consumption: 4 x AAA Alkaline or Lithium batteries (not included)
Solar powered with battery back up
Dimensions: Pool Float Thermometer transmitter Dimensions (LxWxH): 8.5″ x 4.2″ x 3.7″
The Console:
Scroll mode automatically displays each sensor every 5 seconds (channels 1-8)
Re-sync mode if sensor reception is interrupted
Min/Max Memory for indoor/outdoor temperature
Monitors temperature in up to 8 remote locations
Console Dimensions (LxHxW): 4.0 x 3.0 x 0.75 in
Power requirements: 3 x AAA (not included)

Important Note: Not recommended for covered spas. We recommend the F007TP instead.